P&S Iron Buster Wheel and Paint Decon Remover
Iron Buster Wheel & Paint Decon Remover is a color changing, fast acting, pH balanced cleaner formulated to safely dissolve ferrous particulate from wheel and painted surfaces. Iron Buster will safely and effectively remove embedded iron particulate along with other contaminants from wheels and painted surfaces. Once applied product will quickly change to a purple color when iron particulate is plentiful and then can be rinsed to produce a clean surface. For paint - Wash and dry surface prior to product application for maximum effectiveness. Pre washing for wheels is not required. Once surface has been prepared spray apply a generous amount of Iron Buster to the paint and/or wheels. Allow product to dwell for 2 - 5 minutes. Do not alloy product to fully dry on surface. Rinse thoroughly with water using hose or pressure washer. Repeat process if necessary.
Iron Buster Wheel & Paint Decon Remover is a color changing, fast acting, pH balanced cleaner formulated to safely dissolve ferrous particulate from wheel and painted surfaces. Iron Buster will safely and effectively remove embedded iron particulate along with other contaminants from wheels and painted surfaces. Once applied product will quickly change to a purple color when iron particulate is plentiful and then can be rinsed to produce a clean surface. For paint - Wash and dry surface prior to product application for maximum effectiveness. Pre washing for wheels is not required. Once surface has been prepared spray apply a generous amount of Iron Buster to the paint and/or wheels. Allow product to dwell for 2 - 5 minutes. Do not alloy product to fully dry on surface. Rinse thoroughly with water using hose or pressure washer. Repeat process if necessary.
Iron Buster Wheel & Paint Decon Remover is a color changing, fast acting, pH balanced cleaner formulated to safely dissolve ferrous particulate from wheel and painted surfaces. Iron Buster will safely and effectively remove embedded iron particulate along with other contaminants from wheels and painted surfaces. Once applied product will quickly change to a purple color when iron particulate is plentiful and then can be rinsed to produce a clean surface. For paint - Wash and dry surface prior to product application for maximum effectiveness. Pre washing for wheels is not required. Once surface has been prepared spray apply a generous amount of Iron Buster to the paint and/or wheels. Allow product to dwell for 2 - 5 minutes. Do not alloy product to fully dry on surface. Rinse thoroughly with water using hose or pressure washer. Repeat process if necessary.